Trying to connect to VME at address 128.146.39.89:6030...
Opened VME Socket JTAG Connection
TMB VME Slot Address: 21
II actp: slow self test reports 14.
--------------------
Diagnostic analysis:

Failure 14: Error checking current of 3.3V source, or out-of-range.
Operational error 0 reported.
The returned value (result)   1.310A was outside of the expected range of 
(bound_lower)   0.800A and (bound_upper)   1.200A.
The current reported for supply 3.3V is   1.310A, outside the accept-
able range of   0.800A to   1.200A.  This error may be due to a problem with
the LVMB, the LVDB, or an ALCT board sensing error.  Do the input power
supply currents look reasonable?  Perform actp --rtemp to discover if 
the FPGA is frying.
II actp: fast self test OK.
Closed VME Socket JTAG Connection
Trying to connect to VME at address 128.146.39.89:6030...
Opened VME Socket JTAG Connection
TMB VME Slot Address: 21
II actp: slow control id:   chip:8; version:11; date (Euro format):07.09.2001
II actp: fast control id:   chip:7; version:0; date (Euro format):09.12.2002
II actp: 1.8V-> 1.810V, 3.3V-> 3.298V, 5.5V#1-> 5.666V, 5.5V#2-> 0.000V
II actp: 1.8I->0.6090A, 3.3I->1.3775A, 5.5I#1->1.4645A, 5.5I#2->0.0000A
II actp: FPGA temperature:  27.9C
Closed VME Socket JTAG Connection