Trying to connect to VME at address 128.146.39.89:6030...
Opened VME Socket JTAG Connection
TMB VME Slot Address: 21
II actp: slow self test reports 13.
--------------------
Diagnostic analysis:

Failure 13: Error checking current of 1.8V source, or out-of-range.
Operational error 0 reported.
The returned value (result)   0.722A was outside of the expected range of 
(bound_lower)   0.520A and (bound_upper)   0.720A.
The current reported for supply 1.8V is   0.722A, outside the accept-
able range of   0.520A to   0.720A.  This error may be due to a problem with
the LVMB, the LVDB, or an ALCT board sensing error.  Do the input power
supply currents look reasonable?  Perform actp --rtemp to discover if 
the FPGA is frying.
II actp: fast self test OK.
Closed VME Socket JTAG Connection
Trying to connect to VME at address 128.146.39.89:6030...
Opened VME Socket JTAG Connection
TMB VME Slot Address: 21
II actp: slow control id:   chip:8; version:11; date (Euro format):07.09.2001
II actp: fast control id:   chip:7; version:0; date (Euro format):25.09.2002
II actp: 1.8V-> 1.805V, 3.3V-> 3.309V, 5.5V#1-> 5.566V, 5.5V#2-> 5.619V
II actp: 1.8I->0.7308A, 3.3I->1.6037A, 5.5I#1->1.4674A, 5.5I#2->1.4529A
II actp: FPGA temperature:  22.9C
Closed VME Socket JTAG Connection