Trying to connect to VME at address 128.146.39.89:6030...
Opened VME Socket JTAG Connection
TMB VME Slot Address: 21
II actp: slow self test reports 16.
--------------------
Diagnostic analysis:

Failure 16: Error checking current of 5.5V#2 source, or out-of-range.
Operational error 0 reported.
The returned value (result)   1.267A was outside of the expected range of 
(bound_lower)   1.243A and (bound_upper)   1.483A.
The current reported for supply 5.5V#2 is   1.267A, outside the accept-
able range of   1.243A to   1.483A.  This error may be due to a problem with
the LVMB, the LVDB, or an ALCT board sensing error.  Do the input power
supply currents look reasonable?  Perform actp --rtemp to discover if 
the FPGA is frying.
II actp: fast self test OK.
Closed VME Socket JTAG Connection
Trying to connect to VME at address 128.146.39.89:6030...
Opened VME Socket JTAG Connection
TMB VME Slot Address: 21
II actp: slow control id:   chip:8; version:11; date (Euro format):07.09.2001
II actp: fast control id:   chip:7; version:0; date (Euro format):25.09.2002
II actp: 1.8V-> 1.810V, 3.3V-> 3.286V, 5.5V#1-> 5.531V, 5.5V#2-> 5.666V
II actp: 1.8I->0.6902A, 3.3I->1.6124A, 5.5I#1->1.4384A, 5.5I#2->1.2528A
II actp: FPGA temperature:  25.5C
Closed VME Socket JTAG Connection